Designed by a Firefighter to Save Firefighters!

A successful emergency egress requires a secure anchor, fast deployment, hands free for a safe edge transition, and a controllable descent.

CMC also offers a lower cost Escape System that does not sacrifice performance.

Includes: 50' of Sterling 8mm personal escape rope, 2 aluminum carabiners, and 1 Amigo personal rescue 8.

Includes: 50' of Sterling 8mm personal escape rope, 2 aluminum carabiners, and 1 Amigo personal rescue 8.

Includes: 40' of Sterling 8mm personal escape rope, 2 aluminum carabiners, and 1 Amigo personal rescue 8.

A larger version of the Model B Kit, and includes: 100' of Sterling 8mm personal escape rope, 2 aluminum carabiners, and 1 Amigo personal rescue 8.

A larger version of the Model A Kit, and includes: 100' of Sterling 8mm personal escape rope, 2 aluminum carabiners, and 1 Amigo personal rescue 8.

The Personal Escape Kit, Model F is a rectangular rope bag with reflective tape.

For many firefighters, the solution to navigation in an unknown structure with poor visibility is a small cord attached at the entrance and deployed as the firefighter moves through the building.

Our Survivor FR Escape Bag and Survivor RIT Bags are made out of Nomex brand fabric.

The Heavy Lifting Tarp has been designed for use when lifting any heavy patient to the extent that lifting him/her without specialized equipment may endanger rescuers%u2019 health and safety (typically 300 lbs.)

The front pocket of the Rapid Intervention Team (RIT) Kit holds 4 RIT line kits. The side pocket can be used for door wedges, wrenches, etc. The main compartment is large enough for an SCBA and a 60-minute cylinder, plus 100 ft. of RIT line and/or a hallagan tool and an axe.

The Small RIT Kit is a scaled-down version of our original RIT Kit, for those who don%u2019t need to carry as much equipment into the field.

Excellent truck belt in either Kevlar or nylon.

The Survivor Ladder Belt meets the requirements for a fire service ladder belt or escape belt with an updated lightweight design.

Several departments asked for our Survivor Ladder Belt with an extension to the Ladder Hook.

The CMC Survivor Escape Harness is designed to be worn during fire ground operations.

CMC Rescue Escape Line provides outstanding performance in an 8.2 mm diameter line and features a polyester sheath over a nylon core.

Some users were concerned that in a panic situation, a firefighter might squeeze the handle of their descender and not be able to stop.

The Escape Artist offers what most other escape devices do not%u2014a hands-free edge transition and a controllable descent.

The NARS Escape Hook provides a high degree of flexibility allowing a quick and secure solution to the anchor choices.

The ultimate personal escape descender, the SMC Escape 8 allows a controlled rappel on ropes from 5 mm to 3/8 inch.

This very small Figure 8 descender works well with Escape Lines or other small diameter ropes where minimum size and weight are the primary requirements.

This multi-purpose strap was developed by Rick Cearley to provide a means of extricating a downed firefighter from a structure.